3D Printer Filament Cost and Spool Planner
Weigh a partly used spool to see how many complete build plates it can finish and how much filament each plate costs.
Your result
- Filament remaining
- 296 g
- Filament after reserve
- 280 g
- Complete build plates available
- 4 plates
- Material cost per plate
- 1.715 USD
Saved results stay in this browser.
Saved calculations and CSV
How the calculation works
Subtract the matching empty spool’s weight from the current scale reading, then set aside a reserve. Each plate uses the slicer’s model grams plus any separately reported support, brim and purge grams. The price per gram comes from the purchase price divided by the new spool’s net filament weight.
Measure the spool and count complete plates
A spool weighing 486 g with a 190 g tare has 296 g of filament left. A 16 g reserve leaves 280 g for four complete 70 g plates.
Read the full slicer estimate
If the slicer already reports total extrusion for the chosen plate, enter that total under model or total filament and leave additional material at zero. Weigh an empty spool of the same type for the tare.